Hoje resolvi montar meu mp4 no suse pra apagar uns trecos de lá. Mas o diabo do negócio não monta.
Sabendo que ontem ainda enfiei músicas pelo windows, então ele ainda está vivo.
Achei que poderia ser a porta que morreu, mas conectei meu celular e minha câmera na mesma porta que tentei conectar o MP4. Olhem a saída do dmesg:
usb 4-6: new high speed USB device using ehci_hcd and address 13
usb 4-6: device not accepting address 13, error -71
hub 4-0:1.0: unable to enumerate USB device on port 6
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=204.152.186.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55682 DF PROTO=TCP SPT=41929 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B232F63A89F3C)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=204.152.186.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55683 DF PROTO=TCP SPT=41929 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B23D363A89F3C)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=204.152.186.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55684 DF PROTO=TCP SPT=41929 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B251B63A89F3C)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=204.152.186.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55687 DF PROTO=TCP SPT=41929 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B370B63A89F3C)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=37239 WINDOW=0 RES=0x00 RST URGP=0
usb 3-2: new full speed USB device using uhci_hcd and address 5
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=22b8, idProduct=4061
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 3-2: SerialNumber: 000351780108
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=204.152.186.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55688 DF PROTO=TCP SPT=41929 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B4B8B63A89F3C)
usb 3-2: USB disconnect, address 5
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27772 DF PROTO=TCP SPT=40469 DPT=80 WINDOW=113 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B59282F0B228F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=40469 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=40469 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=204.152.186.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=55689 DF PROTO=TCP SPT=41929 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B748B63A89F3C)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=40469 WINDOW=0 RES=0x00 RST URGP=0
usb 4-6: new high speed USB device using ehci_hcd and address 16
usb 4-6: configuration #1 chosen from 1 choice
usb 4-6: New USB device found, idVendor=04cb, idProduct=01d2
usb 4-6: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 4-6: Product: USB PTP Camera
usb 4-6: SerialNumber: 592D3136313707082997F32010CC55
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27775 DF PROTO=TCP SPT=40469 DPT=80 WINDOW=113 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B9AD62F0B228F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=40469 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=51639 DF PROTO=TCP SPT=55215 DPT=80 WINDOW=129 RES=0x00 ACK FIN URGP=0 OPT (0101080A001B9D712F095DD2)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=55215 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=55207 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=37244 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=37244 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.5 DST=204.152.186.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=24057 DF PROTO=TCP SPT=58402 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A001BA6F163A9D363)
usb 4-6: USB disconnect, address 16
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:11:2f:9d:ab:6b:00:30:cd:00:14:95:08:00 SRC=195.135.221.130 DST=10.0.0.5 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=37244 WINDOW=0 RES=0x00 RST URGP=0
Olhar no /var/log/boot.msg me confundiu mais ainda:
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>USB Universal Host Controller Interface driver v3.0
(...)
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:10.0
<6>uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000cc00
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
(...)
<6>uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000cc00
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
(...)
<6>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 6 ports detected
<5>sd 0:0:1:0: [sdb] Attached SCSI disk
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: EHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.27.7-9-pae ehci_hcd
<6>usb usb4: SerialNumber: 0000:00:10.3
<6>PM: Starting manual resume from disk
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sdb2, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>udevd version 128 started
linux-8ogs:/home/isis # lsusb -v
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.27.7-9-pae ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:10.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.27.7-9-pae uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.27.7-9-pae uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.27.7-9-pae uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Numa última esperança achei que fosse o cabo. Troquei. Usei o da câmera p/ conectar. Também não deu certo:
usb 4-6: new high speed USB device using ehci_hcd and address 18
usb 4-6: device not accepting address 18, error -71
hub 4-0:1.0: unable to enumerate USB device on port 6
Alguém tem a mínima noção do que pode ser?
